=encoding utf-8

=head1 NAME

ngx_http_uwsgi_module - Module ngx_http_uwsgi_module




=head1



The C<ngx_http_uwsgi_module> module allows passing
requests to a uwsgi server.




=head1 Example Configuration




    
    location / {
        include    uwsgi_params;
        uwsgi_pass localhost:9000;
    }






=head1 Directives

=head2 uwsgi_bind


B<syntax:> uwsgi_bind I<
    I<C<address>>
    [C<transparent>] E<verbar>
    C<off>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Makes outgoing connections to a uwsgi server originate
from the specified local IP address with an optional port (1.11.2).
Parameter value can contain variables (1.3.12).
The special value C<off> (1.3.12) cancels the effect
of the C<uwsgi_bind> directive
inherited from the previous configuration level, which allows the
system to auto-assign the local IP address and port.





The C<transparent> parameter (1.11.0) allows
outgoing connections to a uwsgi server originate
from a non-local IP address,
for example, from a real IP address of a client:

    
    uwsgi_bind $remote_addr transparent;


In order for this parameter to work,
it is usually necessary to run nginx worker processes with the
L<superuser|ngx_core_module> privileges.
On Linux it is not required (1.13.8) as if
the C<transparent> parameter is specified, worker processes
inherit the C<CAP_NET_RAW> capability from the master process.
It is also necessary to configure kernel routing table
to intercept network traffic from the uwsgi server.







=head2 uwsgi_buffer_size


B<syntax:> uwsgi_buffer_size I<I<C<size>>>


B<default:> I<4kE<verbar>8k>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Sets the I<C<size>> of the buffer used for reading the first part
of the response received from the uwsgi server.
This part usually contains a small response header.
By default, the buffer size is equal to one memory page.
This is either 4K or 8K, depending on a platform.
It can be made smaller, however.







=head2 uwsgi_buffering


B<syntax:> uwsgi_buffering I<C<on> E<verbar> C<off>>


B<default:> I<on>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Enables or disables buffering of responses from the uwsgi server.





When buffering is enabled, nginx receives a response from the uwsgi server
as soon as possible, saving it into the buffers set by the
L</uwsgi_buffer_size> and L</uwsgi_buffers> directives.
If the whole response does not fit into memory, a part of it can be saved
to a temporary file on the disk.
Writing to temporary files is controlled by the
L</uwsgi_max_temp_file_size> and
L</uwsgi_temp_file_write_size> directives.





When buffering is disabled, the response is passed to a client synchronously,
immediately as it is received.
nginx will not try to read the whole response from the uwsgi server.
The maximum size of the data that nginx can receive from the server
at a time is set by the L</uwsgi_buffer_size> directive.





Buffering can also be enabled or disabled by passing
“C<yes>” or “C<no>” in the
C<X-Accel-Buffering> response header field.
This capability can be disabled using the
L</uwsgi_ignore_headers> directive.







=head2 uwsgi_buffers


B<syntax:> uwsgi_buffers I<I<C<number>> I<C<size>>>


B<default:> I<8 4kE<verbar>8k>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Sets the I<C<number>> and I<C<size>> of the
buffers used for reading a response from the uwsgi server,
for a single connection.
By default, the buffer size is equal to one memory page.
This is either 4K or 8K, depending on a platform.







=head2 uwsgi_busy_buffers_size


B<syntax:> uwsgi_busy_buffers_size I<I<C<size>>>


B<default:> I<8kE<verbar>16k>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





When buffering of responses from the uwsgi
server is enabled, limits the total I<C<size>> of buffers that
can be busy sending a response to the client while the response is not
yet fully read.
In the meantime, the rest of the buffers can be used for reading the response
and, if needed, buffering part of the response to a temporary file.
By default, I<C<size>> is limited by the size of two buffers set by the
L</uwsgi_buffer_size> and L</uwsgi_buffers> directives.







=head2 uwsgi_cache


B<syntax:> uwsgi_cache I<I<C<zone>> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Defines a shared memory zone used for caching.
The same zone can be used in several places.
Parameter value can contain variables (1.7.9).
The C<off> parameter disables caching inherited
from the previous configuration level.







=head2 uwsgi_cache_background_update


B<syntax:> uwsgi_cache_background_update I<C<on> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.11.10.





Allows starting a background subrequest
to update an expired cache item,
while a stale cached response is returned to the client.
Note that it is necessary to
allow
the usage of a stale cached response when it is being updated.







=head2 uwsgi_cache_bypass


B<syntax:> uwsgi_cache_bypass I<I<C<string>> ...>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Defines conditions under which the response will not be taken from a cache.
If at least one value of the string parameters is not empty and is not
equal to “0” then the response will not be taken from the cache:

    
    uwsgi_cache_bypass $cookie_nocache $arg_nocache$arg_comment;
    uwsgi_cache_bypass $http_pragma    $http_authorization;


Can be used along with the L</uwsgi_no_cache> directive.







=head2 uwsgi_cache_key


B<syntax:> uwsgi_cache_key I<I<C<string>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Defines a key for caching, for example

    
    uwsgi_cache_key localhost:9000$request_uri;









=head2 uwsgi_cache_lock


B<syntax:> uwsgi_cache_lock I<C<on> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.1.12.





When enabled, only one request at a time will be allowed to populate
a new cache element identified according to the L</uwsgi_cache_key>
directive by passing a request to a uwsgi server.
Other requests of the same cache element will either wait
for a response to appear in the cache or the cache lock for
this element to be released, up to the time set by the
L</uwsgi_cache_lock_timeout> directive.







=head2 uwsgi_cache_lock_age


B<syntax:> uwsgi_cache_lock_age I<I<C<time>>>


B<default:> I<5s>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.8.





If the last request passed to the uwsgi server
for populating a new cache element
has not completed for the specified I<C<time>>,
one more request may be passed to the uwsgi server.







=head2 uwsgi_cache_lock_timeout


B<syntax:> uwsgi_cache_lock_timeout I<I<C<time>>>


B<default:> I<5s>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.1.12.





Sets a timeout for L</uwsgi_cache_lock>.
When the I<C<time>> expires,
the request will be passed to the uwsgi server,
however, the response will not be cached.

B<NOTE>

Before 1.7.8, the response could be cached.








=head2 uwsgi_cache_max_range_offset


B<syntax:> uwsgi_cache_max_range_offset I<I<C<number>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.11.6.





Sets an offset in bytes for byte-range requests.
If the range is beyond the offset,
the range request will be passed to the uwsgi server
and the response will not be cached.







=head2 uwsgi_cache_methods


B<syntax:> uwsgi_cache_methods I<
    C<GET> E<verbar>
    C<HEAD> E<verbar>
    C<POST>
    ...>


B<default:> I<GET HEAD>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





If the client request method is listed in this directive then
the response will be cached.
“C<GET>” and “C<HEAD>” methods are always
added to the list, though it is recommended to specify them explicitly.
See also the L</uwsgi_no_cache> directive.







=head2 uwsgi_cache_min_uses


B<syntax:> uwsgi_cache_min_uses I<I<C<number>>>


B<default:> I<1>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Sets the I<C<number>> of requests after which the response
will be cached.







=head2 uwsgi_cache_path


B<syntax:> uwsgi_cache_path I<
    I<C<path>>
    [C<levels>=I<C<levels>>]
    [C<use_temp_path>=C<on>E<verbar>C<off>]
    C<keys_zone>=I<C<name>>:I<C<size>>
    [C<inactive>=I<C<time>>]
    [C<max_size>=I<C<size>>]
    [C<min_free>=I<C<size>>]
    [C<manager_files>=I<C<number>>]
    [C<manager_sleep>=I<C<time>>]
    [C<manager_threshold>=I<C<time>>]
    [C<loader_files>=I<C<number>>]
    [C<loader_sleep>=I<C<time>>]
    [C<loader_threshold>=I<C<time>>]
    [C<purger>=C<on>E<verbar>C<off>]
    [C<purger_files>=I<C<number>>]
    [C<purger_sleep>=I<C<time>>]
    [C<purger_threshold>=I<C<time>>]>



B<context:> I<http>





Sets the path and other parameters of a cache.
Cache data are stored in files.
The file name in a cache is a result of
applying the MD5 function to the
cache key.
The C<levels> parameter defines hierarchy levels of a cache:
from 1 to 3, each level accepts values 1 or 2.
For example, in the following configuration

    
    uwsgi_cache_path /data/nginx/cache levels=1:2 keys_zone=one:10m;


file names in a cache will look like this:

    
    /data/nginx/cache/<emphasis>c</emphasis>/<emphasis>29</emphasis>/b7f54b2df7773722d382f4809d650<emphasis>29c</emphasis>







A cached response is first written to a temporary file,
and then the file is renamed.
Starting from version 0.8.9, temporary files and the cache can be put on
different file systems.
However, be aware that in this case a file is copied
across two file systems instead of the cheap renaming operation.
It is thus recommended that for any given location both cache and a directory
holding temporary files
are put on the same file system.
A directory for temporary files is set based on
the C<use_temp_path> parameter (1.7.10).
If this parameter is omitted or set to the value C<on>,
the directory set by the L</uwsgi_temp_path> directive
for the given location will be used.
If the value is set to C<off>,
temporary files will be put directly in the cache directory.





In addition, all active keys and information about data are stored
in a shared memory zone, whose I<C<name>> and I<C<size>>
are configured by the C<keys_zone> parameter.
One megabyte zone can store about 8 thousand keys.

B<NOTE>

As part of
commercial subscription,
the shared memory zone also stores extended
cache L<information|ngx_http_api_module>,
thus, it is required to specify a larger zone size for the same number of keys.
For example,
one megabyte zone can store about 4 thousand keys.






Cached data that are not accessed during the time specified by the
C<inactive> parameter get removed from the cache
regardless of their freshness.
By default, C<inactive> is set to 10 minutes.





The special “cache manager” process monitors the maximum cache size set
by the C<max_size> parameter,
and the minimum amount of free space set
by the C<min_free> (1.19.1) parameter
on the file system with cache.
When the size is exceeded or there is not enough free space,
it removes the least recently used data.
The data is removed in iterations configured by
C<manager_files>,
C<manager_threshold>, and
C<manager_sleep> parameters (1.11.5).
During one iteration no more than C<manager_files> items
are deleted (by default, 100).
The duration of one iteration is limited by the
C<manager_threshold> parameter (by default, 200 milliseconds).
Between iterations, a pause configured by the C<manager_sleep>
parameter (by default, 50 milliseconds) is made.





A minute after the start the special “cache loader” process is activated.
It loads information about previously cached data stored on file system
into a cache zone.
The loading is also done in iterations.
During one iteration no more than C<loader_files> items
are loaded (by default, 100).
Besides, the duration of one iteration is limited by the
C<loader_threshold> parameter (by default, 200 milliseconds).
Between iterations, a pause configured by the C<loader_sleep>
parameter (by default, 50 milliseconds) is made.





Additionally,
the following parameters are available as part of our
commercial subscription:






=over



=item 
C<purger>=C<on>E<verbar>C<off>





Instructs whether cache entries that match a
wildcard key
will be removed from the disk by the cache purger (1.7.12).
Setting the parameter to C<on>
(default is C<off>)
will activate the “cache purger” process that
permanently iterates through all cache entries
and deletes the entries that match the wildcard key.



=item 
C<purger_files>=I<C<number>>





Sets the number of items that will be scanned during one iteration (1.7.12).
By default, C<purger_files> is set to 10.



=item 
C<purger_threshold>=I<C<number>>





Sets the duration of one iteration (1.7.12).
By default, C<purger_threshold> is set to 50 milliseconds.



=item 
C<purger_sleep>=I<C<number>>





Sets a pause between iterations (1.7.12).
By default, C<purger_sleep> is set to 50 milliseconds.




=back








B<NOTE>

In versions 1.7.3, 1.7.7, and 1.11.10 cache header format has been changed.
Previously cached responses will be considered invalid
after upgrading to a newer nginx version.








=head2 uwsgi_cache_purge


B<syntax:> uwsgi_cache_purge I<string ...>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.5.7.





Defines conditions under which the request will be considered a cache
purge request.
If at least one value of the string parameters is not empty and is not equal
to “0” then the cache entry with a corresponding
cache key is removed.
The result of successful operation is indicated by returning
the C<204> (C<No Content>) response.





If the cache key of a purge request ends
with an asterisk (“C<*>”), all cache entries matching the
wildcard key will be removed from the cache.
However, these entries will remain on the disk until they are deleted
for either inactivity,
or processed by the cache purger (1.7.12),
or a client attempts to access them.





Example configuration:

    
    uwsgi_cache_path /data/nginx/cache keys_zone=cache_zone:10m;
    
    map $request_method $purge_method {
        PURGE   1;
        default 0;
    }
    
    server {
        ...
        location / {
            uwsgi_pass        backend;
            uwsgi_cache       cache_zone;
            uwsgi_cache_key   $uri;
            uwsgi_cache_purge $purge_method;
        }
    }



B<NOTE>

This functionality is available as part of our
commercial subscription.








=head2 uwsgi_cache_revalidate


B<syntax:> uwsgi_cache_revalidate I<C<on> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.5.7.





Enables revalidation of expired cache items using conditional requests with
the C<If-Modified-Since> and C<If-None-Match>
header fields.







=head2 uwsgi_cache_use_stale


B<syntax:> uwsgi_cache_use_stale I<
    C<error> E<verbar>
    C<timeout> E<verbar>
    C<invalid_header> E<verbar>
    C<updating> E<verbar>
    C<http_500> E<verbar>
    C<http_503> E<verbar>
    C<http_403> E<verbar>
    C<http_404> E<verbar>
    C<http_429> E<verbar>
    C<off>
    ...>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Determines in which cases a stale cached response can be used
when an error occurs during communication with the uwsgi server.
The directive’s parameters match the parameters of the
L</uwsgi_next_upstream> directive.





The C<error> parameter also permits
using a stale cached response if a uwsgi server to process a request
cannot be selected.





Additionally, the C<updating> parameter permits
using a stale cached response if it is currently being updated.
This allows minimizing the number of accesses to uwsgi servers
when updating cached data.





Using a stale cached response
can also be enabled directly in the response header
for a specified number of seconds after the response became stale (1.11.10).
This has lower priority than using the directive parameters.

=over




=item *

The
“L<stale-while-revalidate|https://datatracker.ietf.org/doc/html/rfc5861#section-3>”
extension of the C<Cache-Control> header field permits
using a stale cached response if it is currently being updated.



=item *

The
“L<stale-if-error|https://datatracker.ietf.org/doc/html/rfc5861#section-4>”
extension of the C<Cache-Control> header field permits
using a stale cached response in case of an error.



=back







To minimize the number of accesses to uwsgi servers when
populating a new cache element, the L</uwsgi_cache_lock>
directive can be used.







=head2 uwsgi_cache_valid


B<syntax:> uwsgi_cache_valid I<[I<C<code>> ...] I<C<time>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Sets caching time for different response codes.
For example, the following directives

    
    uwsgi_cache_valid 200 302 10m;
    uwsgi_cache_valid 404      1m;


set 10 minutes of caching for responses with codes 200 and 302
and 1 minute for responses with code 404.





If only caching I<C<time>> is specified

    
    uwsgi_cache_valid 5m;


then only 200, 301, and 302 responses are cached.





In addition, the C<any> parameter can be specified
to cache any responses:

    
    uwsgi_cache_valid 200 302 10m;
    uwsgi_cache_valid 301      1h;
    uwsgi_cache_valid any      1m;







Parameters of caching can also be set directly
in the response header.
This has higher priority than setting of caching time using the directive.

=over




=item *

The C<X-Accel-Expires> header field sets caching time of a
response in seconds.
The zero value disables caching for a response.
If the value starts with the C<@> prefix, it sets an absolute
time in seconds since Epoch, up to which the response may be cached.



=item *

If the header does not include the C<X-Accel-Expires> field,
parameters of caching may be set in the header fields
C<Expires> or C<Cache-Control>.



=item *

If the header includes the C<Set-Cookie> field, such a
response will not be cached.



=item *

If the header includes the C<Vary> field
with the special value “C<*>”, such a
response will not be cached (1.7.7).
If the header includes the C<Vary> field
with another value, such a response will be cached
taking into account the corresponding request header fields (1.7.7).



=back


Processing of one or more of these response header fields can be disabled
using the L</uwsgi_ignore_headers> directive.







=head2 uwsgi_connect_timeout


B<syntax:> uwsgi_connect_timeout I<I<C<time>>>


B<default:> I<60s>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Defines a timeout for establishing a connection with a uwsgi server.
It should be noted that this timeout cannot usually exceed 75 seconds.







=head2 uwsgi_force_ranges


B<syntax:> uwsgi_force_ranges I<C<on> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.7.





Enables byte-range support
for both cached and uncached responses from the uwsgi server
regardless of the C<Accept-Ranges> field in these responses.







=head2 uwsgi_hide_header


B<syntax:> uwsgi_hide_header I<I<C<field>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





By default,
nginx does not pass the header fields C<Status> and
C<X-Accel-...> from the response of a uwsgi
server to a client.
The C<uwsgi_hide_header> directive sets additional fields
that will not be passed.
If, on the contrary, the passing of fields needs to be permitted,
the L</uwsgi_pass_header> directive can be used.







=head2 uwsgi_ignore_client_abort


B<syntax:> uwsgi_ignore_client_abort I<C<on> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Determines whether the connection with a uwsgi server should be
closed when a client closes the connection without waiting
for a response.







=head2 uwsgi_ignore_headers


B<syntax:> uwsgi_ignore_headers I<I<C<field>> ...>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Disables processing of certain response header fields from the uwsgi server.
The following fields can be ignored: C<X-Accel-Redirect>,
C<X-Accel-Expires>, C<X-Accel-Limit-Rate> (1.1.6),
C<X-Accel-Buffering> (1.1.6),
C<X-Accel-Charset> (1.1.6), C<Expires>,
C<Cache-Control>, C<Set-Cookie> (0.8.44),
and C<Vary> (1.7.7).





If not disabled, processing of these header fields has the following
effect:

=over




=item *

C<X-Accel-Expires>, C<Expires>,
C<Cache-Control>, C<Set-Cookie>,
and C<Vary>
set the parameters of response caching;



=item *

C<X-Accel-Redirect> performs an
L<internal
redirect|ngx_http_core_module> to the specified URI;



=item *

C<X-Accel-Limit-Rate> sets the
L<rate
limit|ngx_http_core_module> for transmission of a response to a client;



=item *

C<X-Accel-Buffering> enables or disables
buffering of a response;



=item *

C<X-Accel-Charset> sets the desired
L<ngx_http_charset_module>
of a response.



=back









=head2 uwsgi_intercept_errors


B<syntax:> uwsgi_intercept_errors I<C<on> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Determines whether a uwsgi server responses with codes greater than or equal
to 300 should be passed to a client
or be intercepted and redirected to nginx for processing
with the L<ngx_http_core_module> directive.







=head2 uwsgi_limit_rate


B<syntax:> uwsgi_limit_rate I<I<C<rate>>>


B<default:> I<0>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.7.





Limits the speed of reading the response from the uwsgi server.
The I<C<rate>> is specified in bytes per second.
The zero value disables rate limiting.
The limit is set per a request, and so if nginx simultaneously opens
two connections to the uwsgi server,
the overall rate will be twice as much as the specified limit.
The limitation works only if
buffering of responses from the uwsgi
server is enabled.








=head2 uwsgi_max_temp_file_size


B<syntax:> uwsgi_max_temp_file_size I<I<C<size>>>


B<default:> I<1024m>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





When buffering of responses from the uwsgi
server is enabled, and the whole response does not fit into the buffers
set by the L</uwsgi_buffer_size> and L</uwsgi_buffers>
directives, a part of the response can be saved to a temporary file.
This directive sets the maximum I<C<size>> of the temporary file.
The size of data written to the temporary file at a time is set
by the L</uwsgi_temp_file_write_size> directive.





The zero value disables buffering of responses to temporary files.






B<NOTE>

This restriction does not apply to responses
that will be cached
or stored on disk.








=head2 uwsgi_modifier1


B<syntax:> uwsgi_modifier1 I<I<C<number>>>


B<default:> I<0>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Sets the value of the C<modifier1> field in the
L<uwsgi
packet header|http://uwsgi-docs.readthedocs.org/en/latest/Protocol.html#uwsgi-packet-header>.






=head2 uwsgi_modifier2


B<syntax:> uwsgi_modifier2 I<I<C<number>>>


B<default:> I<0>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Sets the value of the C<modifier2> field in the
L<uwsgi
packet header|http://uwsgi-docs.readthedocs.org/en/latest/Protocol.html#uwsgi-packet-header>.






=head2 uwsgi_next_upstream


B<syntax:> uwsgi_next_upstream I<
    C<error> E<verbar>
    C<timeout> E<verbar>
    C<invalid_header> E<verbar>
    C<http_500> E<verbar>
    C<http_503> E<verbar>
    C<http_403> E<verbar>
    C<http_404> E<verbar>
    C<http_429> E<verbar>
    C<non_idempotent> E<verbar>
    C<off>
    ...>


B<default:> I<error timeout>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Specifies in which cases a request should be passed to the next server:

=over



=item C<error>



an error occurred while establishing a connection with the
server, passing a request to it, or reading the response header;


=item C<timeout>



a timeout has occurred while establishing a connection with the
server, passing a request to it, or reading the response header;


=item C<invalid_header>



a server returned an empty or invalid response;


=item C<http_500>



a server returned a response with the code 500;


=item C<http_503>



a server returned a response with the code 503;


=item C<http_403>



a server returned a response with the code 403;


=item C<http_404>



a server returned a response with the code 404;


=item C<http_429>



a server returned a response with the code 429 (1.11.13);


=item C<non_idempotent>



normally, requests with a
L<non-idempotent|https://datatracker.ietf.org/doc/html/rfc7231#section-4.2.2>
method
(C<POST>, C<LOCK>, C<PATCH>)
are not passed to the next server
if a request has been sent to an upstream server (1.9.13);
enabling this option explicitly allows retrying such requests;



=item C<off>



disables passing a request to the next server.



=back







One should bear in mind that passing a request to the next server is
only possible if nothing has been sent to a client yet.
That is, if an error or timeout occurs in the middle of the
transferring of a response, fixing this is impossible.





The directive also defines what is considered an
L<unsuccessful
attempt|ngx_http_upstream_module> of communication with a server.
The cases of C<error>, C<timeout> and
C<invalid_header> are always considered unsuccessful attempts,
even if they are not specified in the directive.
The cases of C<http_500>, C<http_503>,
and C<http_429> are
considered unsuccessful attempts only if they are specified in the directive.
The cases of C<http_403> and C<http_404>
are never considered unsuccessful attempts.





Passing a request to the next server can be limited by
the number of tries
and by time.







=head2 uwsgi_next_upstream_timeout


B<syntax:> uwsgi_next_upstream_timeout I<I<C<time>>>


B<default:> I<0>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.5.





Limits the time during which a request can be passed to the
next server.
The C<0> value turns off this limitation.







=head2 uwsgi_next_upstream_tries


B<syntax:> uwsgi_next_upstream_tries I<I<C<number>>>


B<default:> I<0>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.5.





Limits the number of possible tries for passing a request to the
next server.
The C<0> value turns off this limitation.







=head2 uwsgi_no_cache


B<syntax:> uwsgi_no_cache I<I<C<string>> ...>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Defines conditions under which the response will not be saved to a cache.
If at least one value of the string parameters is not empty and is not
equal to “0” then the response will not be saved:

    
    uwsgi_no_cache $cookie_nocache $arg_nocache$arg_comment;
    uwsgi_no_cache $http_pragma    $http_authorization;


Can be used along with the L</uwsgi_cache_bypass> directive.







=head2 uwsgi_param


B<syntax:> uwsgi_param I<
    I<C<parameter>> I<C<value>>
    [C<if_not_empty>]>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Sets a I<C<parameter>> that should be passed to the uwsgi server.
The I<C<value>> can contain text, variables, and their combination.
These directives are inherited from the previous configuration level
if and only if there are no C<uwsgi_param> directives
defined on the current level.





Standard
L<CGI
environment variables|https://datatracker.ietf.org/doc/html/rfc3875#section-4.1>
should be provided as uwsgi headers, see the F<uwsgi_params> file
provided in the distribution:

    
    location / {
        include uwsgi_params;
        ...
    }







If the directive is specified with C<if_not_empty> (1.1.11) then
such a parameter will be passed to the server only if its value is not empty:

    
    uwsgi_param HTTPS $https if_not_empty;









=head2 uwsgi_pass


B<syntax:> uwsgi_pass I<[I<C<protocol>>:E<sol>E<sol>]I<C<address>>>



B<context:> I<location>


B<context:> I<if in location>





Sets the protocol and address of a uwsgi server.
As a I<C<protocol>>,
“C<uwsgi>” or “C<suwsgi>”
(secured uwsgi, uwsgi over SSL) can be specified.
The address can be specified as a domain name or IP address,
and a port:

    
    uwsgi_pass localhost:9000;
    uwsgi_pass uwsgi://localhost:9000;
    uwsgi_pass suwsgi://[2001:db8::1]:9090;


or as a UNIX-domain socket path:

    
    uwsgi_pass unix:/tmp/uwsgi.socket;







If a domain name resolves to several addresses, all of them will be
used in a round-robin fashion.
In addition, an address can be specified as a
L<server group|ngx_http_upstream_module>.





Parameter value can contain variables.
In this case, if an address is specified as a domain name,
the name is searched among the described
L<server groups|ngx_http_upstream_module>,
and, if not found, is determined using a
L<ngx_http_core_module>.






B<NOTE>

Secured uwsgi protocol is supported since version 1.5.8.








=head2 uwsgi_pass_header


B<syntax:> uwsgi_pass_header I<I<C<field>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Permits passing otherwise disabled header
fields from a uwsgi server to a client.







=head2 uwsgi_pass_request_body


B<syntax:> uwsgi_pass_request_body I<C<on> E<verbar> C<off>>


B<default:> I<on>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Indicates whether the original request body is passed
to the uwsgi server.
See also the L</uwsgi_pass_request_headers> directive.







=head2 uwsgi_pass_request_headers


B<syntax:> uwsgi_pass_request_headers I<C<on> E<verbar> C<off>>


B<default:> I<on>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Indicates whether the header fields of the original request are passed
to the uwsgi server.
See also the L</uwsgi_pass_request_body> directive.







=head2 uwsgi_read_timeout


B<syntax:> uwsgi_read_timeout I<I<C<time>>>


B<default:> I<60s>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Defines a timeout for reading a response from the uwsgi server.
The timeout is set only between two successive read operations,
not for the transmission of the whole response.
If the uwsgi server does not transmit anything within this time,
the connection is closed.







=head2 uwsgi_request_buffering


B<syntax:> uwsgi_request_buffering I<C<on> E<verbar> C<off>>


B<default:> I<on>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.11.





Enables or disables buffering of a client request body.





When buffering is enabled, the entire request body is
L<read|ngx_http_core_module>
from the client before sending the request to a uwsgi server.





When buffering is disabled, the request body is sent to the uwsgi server
immediately as it is received.
In this case, the request cannot be passed to the
next server
if nginx already started sending the request body.





When HTTPE<sol>1.1 chunked transfer encoding is used
to send the original request body,
the request body will be buffered regardless of the directive value.







=head2 uwsgi_send_timeout


B<syntax:> uwsgi_send_timeout I<I<C<time>>>


B<default:> I<60s>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Sets a timeout for transmitting a request to the uwsgi server.
The timeout is set only between two successive write operations,
not for the transmission of the whole request.
If the uwsgi server does not receive anything within this time,
the connection is closed.







=head2 uwsgi_socket_keepalive


B<syntax:> uwsgi_socket_keepalive I<C<on> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.15.6.





Configures the “TCP keepalive” behavior
for outgoing connections to a uwsgi server.
By default, the operating system’s settings are in effect for the socket.
If the directive is set to the value “C<on>”, the
C<SO_KEEPALIVE> socket option is turned on for the socket.







=head2 uwsgi_ssl_certificate


B<syntax:> uwsgi_ssl_certificate I<I<C<file>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.8.





Specifies a I<C<file>> with the certificate in the PEM format
used for authentication to a secured uwsgi server.





Since version 1.21.0, variables can be used in the I<C<file>> name.







=head2 uwsgi_ssl_certificate_key


B<syntax:> uwsgi_ssl_certificate_key I<I<C<file>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.8.





Specifies a I<C<file>> with the secret key in the PEM format
used for authentication to a secured uwsgi server.





The value
C<engine>:I<C<name>>:I<C<id>>
can be specified instead of the I<C<file>> (1.7.9),
which loads a secret key with a specified I<C<id>>
from the OpenSSL engine I<C<name>>.





Since version 1.21.0, variables can be used in the I<C<file>> name.







=head2 uwsgi_ssl_ciphers


B<syntax:> uwsgi_ssl_ciphers I<I<C<ciphers>>>


B<default:> I<DEFAULT>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.5.8.





Specifies the enabled ciphers for requests to a secured uwsgi server.
The ciphers are specified in the format understood by the OpenSSL library.





The full list can be viewed using the
“C<openssl ciphers>” command.







=head2 uwsgi_ssl_conf_command


B<syntax:> uwsgi_ssl_conf_command I<I<C<command>> ...>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.19.4.





Sets arbitrary OpenSSL configuration
L<commands|https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html>
when establishing a connection with the secured uwsgi server.

B<NOTE>

The directive is supported when using OpenSSL 1.0.2 or higher.






Several C<uwsgi_ssl_conf_command> directives
can be specified on the same level.
These directives are inherited from the previous configuration level
if and only if there are
no C<uwsgi_ssl_conf_command> directives
defined on the current level.






B<NOTE>

Note that configuring OpenSSL directly
might result in unexpected behavior.








=head2 uwsgi_ssl_crl


B<syntax:> uwsgi_ssl_crl I<I<C<file>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.0.





Specifies a I<C<file>> with revoked certificates (CRL)
in the PEM format used to verify
the certificate of the secured uwsgi server.







=head2 uwsgi_ssl_name


B<syntax:> uwsgi_ssl_name I<I<C<name>>>


B<default:> I<host from uwsgi_pass>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.0.





Allows overriding the server name used to
verify
the certificate of the secured uwsgi server and to be
passed through SNI
when establishing a connection with the secured uwsgi server.





By default, the host part from L</uwsgi_pass> is used.







=head2 uwsgi_ssl_password_file


B<syntax:> uwsgi_ssl_password_file I<I<C<file>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.8.





Specifies a I<C<file>> with passphrases for
secret keys
where each passphrase is specified on a separate line.
Passphrases are tried in turn when loading the key.







=head2 uwsgi_ssl_protocols


B<syntax:> uwsgi_ssl_protocols I<
    [C<SSLv2>]
    [C<SSLv3>]
    [C<TLSv1>]
    [C<TLSv1.1>]
    [C<TLSv1.2>]
    [C<TLSv1.3>]>


B<default:> I<TLSv1 TLSv1.1 TLSv1.2>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.5.8.





Enables the specified protocols for requests to a secured uwsgi server.







=head2 uwsgi_ssl_server_name


B<syntax:> uwsgi_ssl_server_name I<C<on> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.0.





Enables or disables passing of the server name through
L<TLS
Server Name Indication extension|http://en.wikipedia.org/wiki/Server_Name_Indication> (SNI, RFC 6066)
when establishing a connection with the secured uwsgi server.







=head2 uwsgi_ssl_session_reuse


B<syntax:> uwsgi_ssl_session_reuse I<C<on> E<verbar> C<off>>


B<default:> I<on>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.5.8.





Determines whether SSL sessions can be reused when working with
a secured uwsgi server.
If the errors
“C<SSL3_GET_FINISHED:digest check failed>”
appear in the logs, try disabling session reuse.







=head2 uwsgi_ssl_trusted_certificate


B<syntax:> uwsgi_ssl_trusted_certificate I<I<C<file>>>



B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.0.





Specifies a I<C<file>> with trusted CA certificates in the PEM format
used to verify
the certificate of the secured uwsgi server.







=head2 uwsgi_ssl_verify


B<syntax:> uwsgi_ssl_verify I<C<on> E<verbar> C<off>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.0.





Enables or disables verification of the secured uwsgi server certificate.







=head2 uwsgi_ssl_verify_depth


B<syntax:> uwsgi_ssl_verify_depth I<I<C<number>>>


B<default:> I<1>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>



This directive appeared in version 1.7.0.





Sets the verification depth in the secured uwsgi server certificates chain.







=head2 uwsgi_store


B<syntax:> uwsgi_store I<
    C<on> E<verbar>
    C<off> E<verbar>
    I<C<string>>>


B<default:> I<off>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Enables saving of files to a disk.
The C<on> parameter saves files with paths
corresponding to the directives
L<ngx_http_core_module> or
L<ngx_http_core_module>.
The C<off> parameter disables saving of files.
In addition, the file name can be set explicitly using the
I<C<string>> with variables:

    
    uwsgi_store /data/www$original_uri;







The modification time of files is set according to the received
C<Last-Modified> response header field.
The response is first written to a temporary file,
and then the file is renamed.
Starting from version 0.8.9, temporary files and the persistent store
can be put on different file systems.
However, be aware that in this case a file is copied
across two file systems instead of the cheap renaming operation.
It is thus recommended that for any given location both saved files and a
directory holding temporary files, set by the L</uwsgi_temp_path>
directive, are put on the same file system.





This directive can be used to create local copies of static unchangeable
files, e.g.:

    
    location /images/ {
        root               /data/www;
        error_page         404 = /fetch$uri;
    }
    
    location /fetch/ {
        internal;
    
        uwsgi_pass         backend:9000;
        ...
    
        uwsgi_store        on;
        uwsgi_store_access user:rw group:rw all:r;
        uwsgi_temp_path    /data/temp;
    
        alias              /data/www/;
    }









=head2 uwsgi_store_access


B<syntax:> uwsgi_store_access I<I<C<users>>:I<C<permissions>> ...>


B<default:> I<user:rw>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Sets access permissions for newly created files and directories, e.g.:

    
    uwsgi_store_access user:rw group:rw all:r;







If any C<group> or C<all> access permissions
are specified then C<user> permissions may be omitted:

    
    uwsgi_store_access group:rw all:r;









=head2 uwsgi_temp_file_write_size


B<syntax:> uwsgi_temp_file_write_size I<I<C<size>>>


B<default:> I<8kE<verbar>16k>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Limits the I<C<size>> of data written to a temporary file
at a time, when buffering of responses from the uwsgi server
to temporary files is enabled.
By default, I<C<size>> is limited by two buffers set by the
L</uwsgi_buffer_size> and L</uwsgi_buffers> directives.
The maximum size of a temporary file is set by the
L</uwsgi_max_temp_file_size> directive.







=head2 uwsgi_temp_path


B<syntax:> uwsgi_temp_path I<
    I<C<path>>
    [I<C<level1>>
    [I<C<level2>>
    [I<C<level3>>]]]>


B<default:> I<uwsgi_temp>


B<context:> I<http>


B<context:> I<server>


B<context:> I<location>





Defines a directory for storing temporary files
with data received from uwsgi servers.
Up to three-level subdirectory hierarchy can be used underneath the specified
directory.
For example, in the following configuration

    
    uwsgi_temp_path /spool/nginx/uwsgi_temp 1 2;


a temporary file might look like this:

    
    /spool/nginx/uwsgi_temp/<emphasis>7</emphasis>/<emphasis>45</emphasis>/00000123<emphasis>457</emphasis>







See also the C<use_temp_path> parameter of the
L</uwsgi_cache_path> directive.







